Product List

■ Single-piece formation of a resin bond wheel with a maximum outer diameter of φ600mm and width of T100mm can be realized.
■ Grinding trace at joint is eliminated.
■ Dynamic balance of 0.1μm is realized for products with a dedicated flange.

These wheels are designed for high shape precision forming of, for example, motor cores. Wheels of the most appropriate specifications are available for not only magnetic materials such as neodymium-iron, but also for ferrites, ceramics and glass.

These cutting tools are used for precision machining of mass production parts. The PCD (polycrystalline diamond) tool is used for machining ceramics, plastics, and non-ferrous metals while the PCBN (polycrystalline CBN) tool is used for high-hardness alloy tool steels and difficult-to-cut nickel alloys. These tools possess finer cutting
surfaces than other cemented carbide / tungsten carbide tools and can last up to ten times longer.

These tools are widely used for the precision machining of plastics, aluminum alloys, carbon materials, and ceramics. They can also be used as wood router bits. The tools produce fine finished surfaces that cemented carbide / tungsten carbide tools cannot match, offer high abrasion resistance, and can last up to ten times longer than cemented / tungsten carbide tools.

These inserts can be attached to cutting tools much like cemented carbide / tungsten carbide inserts. However, compared to carbide inserts, these inserts produce finer finished surfaces and can last up to ten times longer. They can also be made in various shapes and the most appropriate chip material for target work materials can be available.

These wheels are used for cutting and grooving cemented carbide / tungsten carbide, cermet, ceramics, glass, ferrites, semiconductors, carbon, and other non-iron metal materials. They realize less bending and a higher quality cutting surface. A resin bond CBN wheel is provided for cutting neodymium magnets.

These high-efficiency cutting wheels are suitable for high-quality cutting of rare earth magnets such as neodymium magnets and iron-based materials. Their high cutting performance improves cutting surface quality and hence work quality.

These chip saws are edged with PCD (polycrystalline diamond) and can produce finer surfaces than cemented carbide / tungsten carbide tools while lasting ten times as long. They are effective for cutting and grooving of architecture materials, wood, aluminum alloys, glass fiber composite materials, rubbers, and plastics.

This single-crystal diamond drill is used for drilling 1 mm or smaller holes in hard brittle materials such as silicone and ceramics. Compared to PCD drills and coating drills it causes less damage to the interior wall of the drilled holes and can significantly reduce hairline cracks and surface roughness, which are usually problems when working with hard brittle materials, thus, providing stable cutting performance.

These core drills are commonly used to simultaneously machine the inner and outer diameters of the glass or ceramic disks used for hard disk drives. Their usage contributes to the shortening of machining time.